Sometimes an issue with a large home appliance can be an easy fix; however, other times, there can be a big problem that goes unnoticed and needs to be addressed before further damage arises. Common problems with washer can be tended to by the owner and may not even need professional help. Do not hesitate to call for help if you have no clue what to do with your washer instead of trying to figure it out and possibly making it worse.

    Problems with Washer

    Some problems with washer that can occur would be a hot motor, clogged drain, a smelly washer and excessive shaking or moving.

  1. Hot Motor
  2. With most washers, a motor that is overheating will shut down the whole appliance and will need time to cool before putting back into use. If this occurs frequently, the unit may need a new motor all together. For this, call a professional to install that or for any other washer repairs.

  3. Clogged Drain
  4. If the water isn’t draining when your laundry is towards the end of it’s cycle or even during the cycle’s rinsing stages, there may be a clog in the drain or hose. In order to clean this out, you will need to turn off or unplug the washer, find the hose, detach it and either run hot water through it to loosen up whatever has it clogged or you can use a drain snake if it is available to you. Also, make sure there are no kinks in the hose, as this will hinder draining.

  5. Smelly Washer
  6. It is very common for washers to grow mold and mildew. The washer tub makes a great dark, damp space for bacteria to grow and if not cleaned properly or regularly can cause mold to spread into the laundry and cause someone to fall ill from mold bacteria in their clothing. Some cases of mildew in clothing have made people break out in hives or rashes on their body. A tip is to try to clean the washer monthly with mild soap and water or you can run an empty cycle and just add vinegar and baking soda into the detergent deposit area. This will get rid of the smell and kill any bacteria that is wedged into the crevices of the washer tub.

  7. Excessive Shaking / Moving
  8. The washer tends to migrate as it vigorously shakes during the rinse parts of the laundry cycle. If the washer is moving too much and traveling across the laundry room during a cycle, it can be an indicator that the washer isn’t leveled or the load is unbalanced. If the floor itself is imbalanced, you can put something underneath to make it even. This is something to consider when you’re designing your home, specifically the laundry room. Other than that, if the washer is loaded unevenly, that can cause the washer to move around as well. Also, if the washer is given too large of a load that it cannot handle, redistribute the clothing to make it spread evenly in the washer or simply take some items out and hand wash or wash in the net load.

      Bottom Line

      Common problems with washer can be a headache waiting to be unloaded. These are just a few of the most common washer problems that should be given attention to as soon as possible. To avoid any further issues with your appliances, be sure to maintain them properly by using appliance maintenance tips.

      Tags:

      Leave a Reply

      Your email address will not be published. Required fields are marked *